Model |
UTP7624GS-L3 |
Gigabit SFP Slots |
24*1000 Base-X SFP(Mini-GBIC) |
Gigabit copper Ports |
8* 10/100/1000Base-T RJ45(Auto-MDI/MDI-X) combo |
10G SFP+ Slots |
4*1000/10G Base-X SFP+ |
Console Port |
<span “=”” style=”box-sizing: border-box; margin: 0px; padding: 0px; outline: none;”><span “=”” style=”box-sizing: border-box; margin: 0px; padding: 0px; outline: none;”>1*RJ45-R232 serial port(115200,8,N,1) |
OOB port |
1*10/100Base-TX RJ45(only to web management) |
Default IP:192.168.1.200 name:admin password:admin |
Init Key |
Short press restart |
>5s press recovery to default |
Standard and Protocols |
IEEE802.3 , IEEE802.3u, IEEE802.3ab, IEEE802.3Z, IEEE802.3X, IEEE 802.1Q IEEE 802.1p IEEE 802.3ad , IEEE 802.1D, IEEE 802.1X |
Switching Capacity |
128Gbps / non-blocking |
Packet Forwarding Rate |
95.2Mpps@64 bytes |
Forwarding Modes |
Store-and-Forward |
Packet Buffer |
12Mbit |
MAC Address Table |
16K |
Jumbo Frame |
9K bytes |
Surge Immunity |
6KV Execute: IEC61000-4-5 |
ESD Immunity |
6KV Contact discharge |
8KV Air discharge |
Execute: IEC61000-4-2 |
Power Module |
Input:100~240VAC 50/60Hz(auto-sensing) Output:DC12V150W |
Support redundant duplex power module(1 module inside default,another module bought extra) |
Power Consumption |
60W |
Operating Temperature |
-10-50℃ |
Storage Temperature |
-40-85℃ |
Humidity |
5%-95%(non-condensing) |
<span “=”” style=”box-sizing: border-box; margin: 0px; padding: 0px; outline: none;”>Dimension<span “=”” style=”box-sizing: border-box; margin: 0px; padding: 0px; outline: none;”>(<span “=”” style=”box-sizing: border-box; margin: 0px; padding: 0px; outline: none;”>L×W×H<span “=”” style=”box-sizing: border-box; margin: 0px; padding: 0px; outline: none;”>) |
442mm×320mm×44.5mm |
Weight |
5.65kg |
Certification |
CE, FCC, ROHS |
Software Features |
Ports Management |
Support port enabling and disabling |
Support port speed settings |
Support port full-duplex mode |
Support IEEE802.3x flow control |
Support Jumbo Frame |
Support port name modification |
VLAN |
Support of 4K VLAN |
Support 802.1Q VLAN protocol |
Support QINQ |
Support GVRP dynamic VLAN registration |
Support VLAN based on portprotocolMAC |
QoS |
Support COS classification base on 802.1p |
Support QoS base on DSCP |
Support 8 priority queues |
Queue scheduling: SP, WRR, SP+WRR |
Support 802.1p CoS/DSCP priority |
Multi-brocast |
Support SNMPV1 / V2 / V3 protocols |
Support IGMP Snooping |
Support MLD-snooping |
Security Feature |
Supports IP, MAC, port, VLAN binding combinations |
Support MAC address auto-learning, aging and filtration |
Support port isolation, port speed limit |
<span “=”” style=”box-sizing: border-box; margin: 0px; padding: 0px; outline: none;”>Support STP RSTP MSTP<span “=”” style=”box-sizing: border-box; margin: 0px; padding: 0px; outline: none;”>,<span “=”” style=”box-sizing: border-box; margin: 0px; padding: 0px; outline: none;”>Fast-Ring |
Support 5 groups of link aggregation |
Support LLDP ,Smart-Link ,DLDP |
Support 802.1X |
ACL |
Support base on source-MAC, target-MAC, protocal-classify, source-IP, target-IP, L4 ports-number |
Support time-range management |
System Management |
Web-based GUI and CLI management |
Support FTP / TFTP / HTTP load upgrade |
Support traffic statistics |
Support MAC address table query |
Support IP address, DNS server modifications |
Support user name and password modification |
Support for history, log management |
Support System Configuration Backup |
Support to recover the default factory settings on reboot |
L3 Management |
Support IPV4 static route setup |
Support RIP V1/2 on IPV4 |
Support OSPF V1/V2 |
Support static ARP Add,delete,burn-in time sutup/check |
Support static NDAdd,delete,burn-in time sutup/check |
Support VRRP V1/2/3 virtual redundant route protocol |
Support group-broadcasting PIM,IGMP V1/V2/V3,MLD(IPV4) |
Support DHCP client,server |
Support relay repeater,DHCP snooping |
Support duplex transfer check mechanism |
Reviews
There are no reviews yet.