CCTV Camera Surge Protection BNC LAN Cheapest Surge Protective SPD CCTV Camera Lighting Protector Security Camera Repair Singapore
>
>
>
CCTV Camera Surge Protection BNC LAN Cheapest Surge Protective SPD CCTV Camera Lighting Protector Security Camera Repair Singapore

CCTV Camera Surge Protection BNC LAN Cheapest Surge Protective SPD CCTV Camera Lighting Protector Security Camera Repair Singapore

$6.00

CHOICE Brand and SGCCTV Brand are Singapore IPOS Trade Mark Registered.
Widely deployed in Shopping Malls, Residential, Commercial, Office, Warehouse.
Great Technical Support at Sim Lim Square 02-81 11am~7pm Daily +65 98534404
Technical Support +65 81120788, Site Visit Maintenance +65 81985572.
- +

CCTV Camera Surge Protection BNC LAN Cheapest Surge Protective SPD CCTV Camera Lighting Protector Security Camera Repair Singapore

CHOICECYCLE CCTV offer the best CCTV Camera Surge Protection BNC LAN Cheapest Surge Protective SPD CCTV Camera Lighting Protector Security Camera Repair Singapore

Features:
  1. Surge Protection Device (SPD): Specially designed to protect CCTV cameras from electrical surges and lightning strikes.
  2. BNC and LAN Compatibility: Supports BNC connectors for analog cameras and LAN interfaces for IP cameras.
  3. Compact Design: Lightweight and easy to integrate into existing setups.
  4. High Surge Capacity: Can withstand significant voltage spikes, ensuring device safety.
  5. Grounding Capability: Comes with grounding points to effectively channel excess electricity.
  6. Plug-and-Play Installation: No complex setup required.
Functions:
  1. Surge Absorption: Shields connected cameras from voltage surges due to lightning or power fluctuations.
  2. Signal Protection: Maintains signal integrity for both analog and IP cameras.
  3. Lightning Protection: Redirects excessive electrical energy safely to the ground.
  4. Extends Device Lifespan: Prevents damage to cameras and related equipment.
Advantages:
  1. Affordable Solution: Cost-effective protection for valuable surveillance equipment.
  2. Versatility: Suitable for both BNC-based analog and LAN-based IP camera systems.
  3. Enhanced Reliability: Ensures uninterrupted operation even in surge-prone environments.
  4. Ease of Use: Simple to install and maintain without technical expertise.
  5. Compact and Durable: Small form factor with robust build quality.
Benefits:
  1. Increased Security: Protects CCTV cameras from downtime caused by electrical damage.
  2. Cost Savings: Avoids expensive repairs and replacements of cameras and networking devices.
  3. Peace of Mind: Reliable protection against lightning and surges, especially in areas prone to thunderstorms.
  4. Improved System Performance: Maintains consistent video quality by preventing signal interference.

 

SP1BNC-TL $6.00 each (Buy 20 + 1 FOC)
SP8BNC-TL $58.00 each (Buy 10 +1 FOC) 
SP16BNC-TL $88.00 each (Buy 10 +1 FOC) 

1. Collection from SGCCTV Choicecycle Sim Lim Square CCTV SPECIALIST #02-81 11am~8pm. Whatsapp 90254466 for stock level before visit.

Tips for Optimal Installation of CCTV Camera Surge Protection Devices:

1. Placement and Connection

  • Install Close to the Camera or DVR/NVR: Place the surge protector as near as possible to the device you aim to protect (e.g., CCTV camera, DVR, or NVR).
  • Secure Grounding: Ensure the surge protector is properly grounded. Without proper grounding, the device cannot safely redirect excess energy.

2. Compatibility Check

  • Match Connector Types: Ensure the surge protector is compatible with your camera system (e.g., BNC for analog, LAN for IP cameras).
  • Verify Voltage Ratings: The surge protector should support the voltage range of your CCTV power supply.

3. Cabling Best Practices

  • Avoid Long Cables: Minimize cable lengths to reduce the risk of power surges traveling through wires.
  • Shielded Cables: Use shielded cables for improved protection in areas prone to electromagnetic interference (EMI).

4. Environmental Considerations

  • Indoor vs. Outdoor Use: Use surge protectors rated for outdoor use if installed externally. Ensure they are weather-resistant if exposed to elements.
  • Avoid High-Risk Zones: Avoid placing devices near high-voltage equipment or areas prone to frequent power fluctuations.

5. Proper Grounding Practices

  • Ground Wires: Use high-quality, short ground wires to reduce resistance and improve efficiency.
  • Single Ground Point: Ensure all equipment is connected to a single grounding point to prevent potential differences that may cause additional surges.

6. Maintenance

  • Periodic Inspections: Regularly check connections and grounding for wear and tear or corrosion.
  • Replace Damaged Units: Replace surge protectors showing signs of wear or damage.

7. Installation Techniques

  • Follow Manufacturer’s Guidelines: Adhere to the product manual for specific installation instructions.
  • Tight Connections: Ensure all connectors are securely fastened to avoid loose connections that may compromise surge protection.

8. Backup Measures

  • Use with UPS: Combine the surge protector with an Uninterruptible Power Supply (UPS) to ensure continuous operation during outages.
  • Multiple Layers of Protection: For high-risk areas, consider a layered approach with a main surge protector at the power source and secondary protectors near cameras and DVR/NVR units.

 

CCTV Camera Surge Protection BNC LAN Cheapest Surge Protective SPD CCTV Camera Lighting Protector Security Camera Repair Singapore

 

To install a CCTV surge protection BNC lighting protector, follow these general steps:

  1. Gather the necessary tools and equipment: You will need the CCTV surge protector, a screwdriver, BNC connectors, coaxial cable, and a cable cutter/stripper.
  2. Power off the CCTV system: Before working with any electrical equipment, ensure that the power to the CCTV system is turned off to prevent any accidents or damage.
  3. Locate the BNC connectors: Find the BNC connectors on both ends of the coaxial cable that connects the camera to the DVR. The connectors resemble cylinders with a pin in the center.
  4. Disconnect the cables: Carefully detach the BNC connectors from the camera and the DVR. This may involve unscrewing or pulling them apart, depending on the specific connectors used.
  5. Install the surge protector: Take the BNC lighting protector and connect it between the coaxial cable ends. Ensure that the surge protector is securely connected to both the camera and the DVR.
  6. Secure the connections: Use a screwdriver to tighten the connectors on the surge protector, ensuring a snug fit. This will help maintain good electrical contact.
  7. Connect the cables: Reattach the coaxial cable to both the camera and the DVR. Make sure the connectors are firmly screwed on or pushed in until they click into place.
  8. Check the installation: Double-check that all connections are secure and properly tightened. Verify that the surge protector is correctly installed between the camera and the DVR.
  9. Power on the CCTV system: Once you’re confident that the surge protector is installed correctly, you can turn on the power to the CCTV system.

Please note that the specific installation process may vary depending on the brand and model of the surge protector and CCTV system you are using.
Always refer to the manufacturer’s instructions for detailed guidance on installing the specific surge protector you have.
Additionally, if you are unsure about any step or lack experience with electrical installations, it is recommended to consult a professional or an experienced technician for assistance.

 

CCTV Camera Surge Protection BNC LAN Cheapest Surge Protective SPD CCTV Camera Lighting Protector Security Camera Repair Singapore

 

To install the CCTV Surge Protection BNC Lightning Protector, follow these steps:

  1. Gather the necessary tools and equipment: You will need the BNC Lightning Protector, a screwdriver, coaxial cable, and the CCTV camera system.
  2. Identify the location: Determine the optimal location for installing the surge protector. It should be close to the CCTV DVR system or power supply unit.
  3. Power off the system: Before proceeding with the installation, make sure to power off the CCTV camera system and disconnect it from the power source to avoid any electrical mishaps.
  4. Locate the BNC connectors: The BNC connectors are usually found at the back of the CCTV DVR system or the power supply unit. Identify the BNC connectors that you want to protect using the surge protector.
  5. Disconnect the BNC cables: Carefully detach the BNC cables from the CCTV DVR system or the power supply unit. Remember to keep track of which cable corresponds to which port for reconnection later.
  6. Connect the surge protector: Take the BNC Lightning Protector and connect the BNC connectors of the cables you just disconnected into the corresponding ports on the surge protector. Ensure that the connections are secure.
  7. Connect the surge protector to the DVR system: Using the coaxial cable, connect one end to the output port of the surge protector and the other end to the input port of the CCTV DVR system or the power supply unit.
  8. Secure the connections: Check that all the connections are tight and secure to avoid any signal loss or interference.
  9. Power on the system: Once you have completed the installation and ensured all connections are secure, you can reconnect the CCTV camera system to the power source and power it on.
  10. Test the system: Verify that the CCTV camera system is functioning correctly and that the video signal is clear. Monitor the system for any signs of lightning-related issues, such as sudden drops in video quality or system malfunctions.

Note: It’s important to read and follow the manufacturer’s instructions specific to the BNC Lightning Protector you have purchased, as installation procedures may vary slightly. Additionally, if you are unsure about any step of the installation process or if you have concerns about your electrical system, it’s recommended to consult a professional electrician or technician for assistance.

DAHUA SWITCH SOLUTIONS

DAHUA SWITCH CCTV CAMERA DH-CS4006-4ET-60  || DAHUA SWITCH CCTV CAMERA DH-CS4220-16GT-190  ||
DAHUA Drone Thermal Camera DHI-UAV-V3300  ||  Industrial Drone Thermal Camera with Gimbal  ||
Video Wall System LS550UDM-EG Display Panels ||  Solar-Powered CCTV DH-SD6C3432XB-HNR-AGQ-PV 4MP 32X  ||
Solar-Powered CCTV KIT DH-PFM364L-D1

UTEPO SWITCH 8-Ports UTP3-SW08-TP120-A1  || UTEPO Switch Singapore SF26P-LM 24 Ports  ||

1. Collection from SGCCTVChoicecycle Sim Lim Square CCTV SPECIALIST #02-81 11am~8pm. Whatsapp 98534404 for stock level before visit.  2. Payment by PayNow 201207820G


HIKVISION CCTV CAMERA PTZ

HIKVISION DS-2CE70DF0T-MF ColorVu Dome ||  Hikvision DS-2CE16D1T-IT3 2MP 1080P Bullet  || HIKVISION 4G SIM CARD DS-2CD1023G2-LIDUF-4G-SL ||
HIKVISION 4MP DS-2CD1343G2-I(UF) || 
Hikvision 4MP POE DOME Camera DS-2CD1143G2-LIU || HIKVISION FISHEYE 5MP Camera DS-2CD2955G0-IS  ||

HIKVISION SOLAR-POWER 4MP DS-2XS2T47G1-LDH/4G || Hikvision POE Bullet Camera DS-2CD2T23G0-I5-I8  ||  HIKVISION Thermal Optical BULLET CAMERA DS-2TD2608-1  ||

Hikvision POE Bullet Camera DS-2CD2023G2-I ||  HIKVISION 4MP Motorized Varifocal DS-2XC6645G0  || HIKVISION AI Collect Audience Insight iDS-2CD7A46G0 || HIKVISION AI DeepinView Camera iDS-2CD7A47G0-XZHS 4MP || 

HIKVISION 4MP Motorized Varifocal DS-2CD2643G2-IZS ||  HIKVISION LICENSE PLATE CAMERA DS-TCG405-E ||  HIKVISION LICENSE PLATE CAMERA DS-2CD7A26G0-P-IZHS8 LPR ||

Marine Grade CCTV SINGAPORE HIKVISION DS-2XE6222F-IS  ||  HIKVISION CCTV CAMERA BRACKET DS-1260ZJ ||
HIKVISION PTZ Camera CSA Certified DS-2SF6425XG-EL  ||

HIKVISION CCTV DVR NVR

CCTV NVR Hikvision DS-7604NI-Q1/4P  ||  HIKVISION DVR eSSD iDS-E04HQHI-B || HIKVISION POE SSD NVR DS-7804N-SSD  || HIKVISION 8CH Mobile NVR AE-MH0408||
HIKVISION NVR FOOD RETAIL POS DS-7608NI-M2-8P  ||

HIKVISION 16CH Mobile NVR DS-MP7608HN/GLF/WI58  || HIKVISION 32CH NVR Video Recorder DS-MP3516-RH  || CCTV NVR Hikvision DS-9632NI-M8 DS-9664NI-M8  ||

CCTV Camera Surge Protection BNC LAN Cheapest Surge Protective SPD CCTV Camera Lighting Protector Security Camera Repair Singapore

Reviews

There are no reviews yet.

Be the first to review “CCTV Camera Surge Protection BNC LAN Cheapest Surge Protective SPD CCTV Camera Lighting Protector Security Camera Repair Singapore”

Your email address will not be published. Required fields are marked *

Donec accumsan auctor iaculis. Sed suscipit arcu ligula, at egestas magna molestie a. Proin ac ex maximus, ultrices justo eget, sodales orci. Aliquam egestas libero ac turpis pharetra, in vehicula lacus scelerisque. Vestibulum ut sem laoreet, feugiat tellus at, hendrerit arcu..

Nunc lacus elit, faucibus ac laoreet sed, dapibus ac mi. Maecenas eu ante a elit tempus fermentum. Aliquam commodo tincidunt semper. Phasellus accumsan, justo ac mollis pharetra, ex dui pharetra nisl, a scelerisque ipsum nulla ac sem. Cras eu risus urna. Duis lorem sapien, congue eget nisl sit amet, rutrum faucibus elit.

Donec accumsan auctor iaculis. Sed suscipit arcu ligula, at egestas magna molestie a. Proin ac ex maximus, ultrices justo eget, sodales orci. Aliquam egestas libero ac turpis pharetra, in vehicula lacus scelerisque. Vestibulum ut sem laoreet, feugiat tellus at, hendrerit arcu.

Nunc lacus elit, faucibus ac laoreet sed, dapibus ac mi. Maecenas eu ante a elit tempus fermentum. Aliquam commodo tincidunt semper. Phasellus accumsan, justo ac mollis pharetra, ex dui pharetra nisl, a scelerisque ipsum nulla ac sem. Cras eu risus urna. Duis lorem sapien, congue eget nisl sit amet, rutrum faucibus elit.

1 Rochor Canal Road Sim Lim Square #02-81 Singapore 188504  [email protected]  Whatsapp +65 9853 4404

Operation 11am to 6pm daily (9am~11am, 6pm~8pm by appt only)    © sgcctv.com.sg – All Rights Reserved

Start typing and press Enter to search

Shopping Cart

No products in the cart.