CCTV Surge Protection 16ch Hub BNC Lighting Protector CHOICE BNC Lighting Protector 16 Channel BNC Video Surge Protector Arrester for CCTV DVR Camera System
$8.00
CHOICE Brand and SGCCTV Brand are Singapore IPOS Trade Mark Registered.
Widely deployed in Shopping Malls, Residential, Commercial, Office, Warehouse.
Great Technical Support at Sim Lim Square 02-81 11am~7pm Daily +65 98534404
Technical Support +65 81120788, Site Visit Maintenance +65 81985572.
CCTV Surge Protection 16ch Hub BNC Lighting Protector CHOICE BNC Lighting Protector 16 Channel BNC Video Surge Protector Arrester for CCTV DVR Camera System
CHOICECYCLE CCTV offer the best Surge Protection 16ch Hub BNC Lighting Protector CHOICE BNC Lighting Protector 16 Channel BNC Video Surge Protector Arrester for CCTV DVR Camera System
Features and Functions:
- 16-Channel Protection: The surge protector is designed to provide protection for up to 16 channels, allowing it to cover multiple cameras or connections within a CCTV system.
- BNC Connectivity: The device likely utilizes BNC connectors, which are commonly used in CCTV systems for video transmission. This ensures compatibility with standard CCTV equipment.
- Lightning Protection: The primary function of the surge protector is to guard against voltage spikes and surges, particularly those caused by lightning. It helps prevent damage to connected CCTV equipment.
- Arrester Function: Surge protectors typically include arrester components that divert excess voltage away from the connected devices, preventing damage to sensitive electronics.
- Compatibility with DVR Systems: The surge protector is designed for use with DVR (Digital Video Recorder) systems commonly employed in CCTV setups.
- Compact and Mountable Design: These devices often have a compact form factor, allowing for easy installation in various locations. They may also be mountable for added convenience.
- Transparent Operation: Surge protectors work transparently, allowing the normal operation of CCTV systems while actively protecting against electrical surges.
Benefits and Advantages:
- Equipment Protection: The primary benefit is the protection of CCTV equipment, including cameras, DVRs, and other connected devices, from damage caused by power surges.
- Reduced Downtime: By preventing damage to sensitive electronics, surge protectors contribute to minimizing system downtime and the need for costly repairs or replacements.
- Long-Term Cost Savings: The upfront investment in surge protection can result in long-term cost savings by extending the lifespan of CCTV equipment and reducing maintenance costs.
- Enhanced System Reliability: Surge protectors enhance the overall reliability of a CCTV system by safeguarding it against unpredictable and potentially destructive electrical events.
- Easy Integration: The surge protector is designed to integrate seamlessly into existing CCTV setups, providing a simple and effective solution for protecting valuable equipment.
- Peace of Mind: Users can have peace of mind knowing that their CCTV system is protected against sudden electrical surges, particularly in areas prone to lightning activity.
It’s important to note that the specific features and benefits may vary between different models and brands of surge protectors. Always refer to the product documentation or contact the manufacturer for detailed information about a particular CCTV surge protector.
SP1 Retail Price $18.00 each. $8.00 (minimum 200pcs), $12.00 (minimum 50pcs). Download Specification
SP8 Retail Price $198.00 each. $58.00 (minimum 10pcs), $88.00 (minimum 3pcs).
SP16 Retail Price $298.00 each. $88.00 (minimum 10pcs), $128.00 (minimum 3pcs).
1. Collection from SGCCTV Choicecycle Sim Lim Square CCTV SPECIALIST #02-81 11am~8pm. Whatsapp 90254466 for stock level before visit.
4. Can issue e-Invoice for your accounting. (upon request)
More Common choice to meet your needs: || Fisheye 360 degree CC380PF || C1C || C1HC || C3A Battery Camera || C6CN || C6TC || HIK Q1 || USB2052MP || Dahua 2C || 5G 2.4G Pan Tilt Camera CC524PT ||
More Choice : Battery-Powered Camera BC1-B1 || IP CAMERA Outdoor C3W || Hikvision 5MP Fisheye DS-2CD2955FWD-I || Dual-Band IP CAMERA 5G C6P || IP Camera Dual-band 2.4-5G ||
12MP Fisheye-Network Camera CC81IPC59AE ||
CCTV Surge Protection 16ch Hub BNC Lighting Protector CHOICE BNC Lighting Protector 16 Channel BNC Video Surge Protector Arrester for CCTV DVR Camera System
- ➤ The video signal ray protector is mainly applied in surge protection for the cable TV transmission system, the CCTV video monitoring system equipment.
- ➤ High Continuous Current Capacity, Long Life Energy saving, environmental protection, frame structure for easy installation.
- ➤Adopt multi-level protection, low residual voltage, good protection effect. Prevents multiple types of system equipment from being permanently damaged.
- ➤ Low insertion loss, excellent transmission performance. Built-in rapid semiconductor protection device, response speed in nanoseconds.
- ➤ The coaxial cable transmission line can be widely used (such as hard disk recorder, matrix, optical transceiver, camera)
CHOICE Brand and SGCCTV Brand are Singapore IPOS Trade Mark Registered.
Widely deployed in Shopping Malls, Residential, Commercial, Office, Warehouse.
Compatible with ALL DVR & NVR ONVIF protocols.
Great Technical Support at Sim Lim Square 02-81 11am~7pm Daily +65 98534404
Technical Support +65 81120788, Site Visit Maintenance +65 81985572.
To install a CCTV surge protection BNC lighting protector, follow these general steps:
- Gather the necessary tools and equipment: You will need the CCTV surge protector, a screwdriver, BNC connectors, coaxial cable, and a cable cutter/stripper.
- Power off the CCTV system: Before working with any electrical equipment, ensure that the power to the CCTV system is turned off to prevent any accidents or damage.
- Locate the BNC connectors: Find the BNC connectors on both ends of the coaxial cable that connects the camera to the DVR. The connectors resemble cylinders with a pin in the center.
- Disconnect the cables: Carefully detach the BNC connectors from the camera and the DVR. This may involve unscrewing or pulling them apart, depending on the specific connectors used.
- Install the surge protector: Take the BNC lighting protector and connect it between the coaxial cable ends. Ensure that the surge protector is securely connected to both the camera and the DVR.
- Secure the connections: Use a screwdriver to tighten the connectors on the surge protector, ensuring a snug fit. This will help maintain good electrical contact.
- Connect the cables: Reattach the coaxial cable to both the camera and the DVR. Make sure the connectors are firmly screwed on or pushed in until they click into place.
- Check the installation: Double-check that all connections are secure and properly tightened. Verify that the surge protector is correctly installed between the camera and the DVR.
- Power on the CCTV system: Once you’re confident that the surge protector is installed correctly, you can turn on the power to the CCTV system.
Please note that the specific installation process may vary depending on the brand and model of the surge protector and CCTV system you are using. Always refer to the manufacturer’s instructions for detailed guidance on installing the specific surge protector you have. Additionally, if you are unsure about any step or lack experience with electrical installations, it is recommended to consult a professional or an experienced technician for assistance.
CCTV Surge Protection 16ch Hub BNC Lighting Protector CHOICE BNC Lighting Protector 16 Channel BNC Video Surge Protector Arrester for CCTV DVR Camera System
To install the CCTV Surge Protection BNC Lightning Protector, follow these steps:
- Gather the necessary tools and equipment: You will need the BNC Lightning Protector, a screwdriver, coaxial cable, and the CCTV camera system.
- Identify the location: Determine the optimal location for installing the surge protector. It should be close to the CCTV DVR system or power supply unit.
- Power off the system: Before proceeding with the installation, make sure to power off the CCTV camera system and disconnect it from the power source to avoid any electrical mishaps.
- Locate the BNC connectors: The BNC connectors are usually found at the back of the CCTV DVR system or the power supply unit. Identify the BNC connectors that you want to protect using the surge protector.
- Disconnect the BNC cables: Carefully detach the BNC cables from the CCTV DVR system or the power supply unit. Remember to keep track of which cable corresponds to which port for reconnection later.
- Connect the surge protector: Take the BNC Lightning Protector and connect the BNC connectors of the cables you just disconnected into the corresponding ports on the surge protector. Ensure that the connections are secure.
- Connect the surge protector to the DVR system: Using the coaxial cable, connect one end to the output port of the surge protector and the other end to the input port of the CCTV DVR system or the power supply unit.
- Secure the connections: Check that all the connections are tight and secure to avoid any signal loss or interference.
- Power on the system: Once you have completed the installation and ensured all connections are secure, you can reconnect the CCTV camera system to the power source and power it on.
- Test the system: Verify that the CCTV camera system is functioning correctly and that the video signal is clear. Monitor the system for any signs of lightning-related issues, such as sudden drops in video quality or system malfunctions.
Note: It’s important to read and follow the manufacturer’s instructions specific to the BNC Lightning Protector you have purchased, as installation procedures may vary slightly. Additionally, if you are unsure about any step of the installation process or if you have concerns about your electrical system, it’s recommended to consult a professional electrician or technician for assistance.
CCTV Surge Protection 16ch Hub BNC Lighting Protector CHOICE BNC Lighting Protector 16 Channel BNC Video Surge Protector Arrester for CCTV DVR Camera System
Nunc lacus elit, faucibus ac laoreet sed, dapibus ac mi. Maecenas eu ante a elit tempus fermentum. Aliquam commodo tincidunt semper. Phasellus accumsan, justo ac mollis pharetra, ex dui pharetra nisl, a scelerisque ipsum nulla ac sem. Cras eu risus urna. Duis lorem sapien, congue eget nisl sit amet, rutrum faucibus elit.
Donec accumsan auctor iaculis. Sed suscipit arcu ligula, at egestas magna molestie a. Proin ac ex maximus, ultrices justo eget, sodales orci. Aliquam egestas libero ac turpis pharetra, in vehicula lacus scelerisque. Vestibulum ut sem laoreet, feugiat tellus at, hendrerit arcu.
Nunc lacus elit, faucibus ac laoreet sed, dapibus ac mi. Maecenas eu ante a elit tempus fermentum. Aliquam commodo tincidunt semper. Phasellus accumsan, justo ac mollis pharetra, ex dui pharetra nisl, a scelerisque ipsum nulla ac sem. Cras eu risus urna. Duis lorem sapien, congue eget nisl sit amet, rutrum faucibus elit.
Related Products
-
Rated 4.65 out of 5
Body Worn Camera CCBW1W 95g Lite Weight Police Body Worn WIFI Live Stream Security Enforcement Public Harassment Video Evidence Mobile Camera School Security
Rated 4.65 out of 5$198.00 -
Rated 4.23 out of 5
6U Server Rack WM6406 Wall Mount POE SWITCH CCTV DVR NVR MONITOR ROUTER MODEM Protect Damage No messy Network Connections Security System SGCCTV DVR NVR Repair
Rated 4.23 out of 5$188.00 -
CCTV HOUSING BLOWER Easy access for service & installation Works with CCTV and IP security cameras (12V-AC) Singapore Security System SGCCTV Repair
Save52.6%Save $20.00Only$18.00$38.00Original price was: $38.00.$18.00Current price is: $18.00. -
Fire Sprinkler Camera Spy Camera Hidden Camera 2MP 4MP 8MP Resolution Color Lens Camera Choicecycle SGCCTV Sim Lim Square 02-81
Save23.3%Save $30.10Only$98.90$129.00Original price was: $129.00.$98.90Current price is: $98.90.
Reviews
There are no reviews yet.