ENTRYPASS EP.L3800.PSU Elevator Master Control Panel EP.POB.PSU EP.N4800.PSU EP.N5200.PSU ACCESS CONTROL REPAIR REPLACE

ENTRYPASS EP.L3800.PSU Elevator Master Control Panel Singapore | EP.POB.PSU | EP.NE4800.PSU | Elevator Access Control Repair Replace Upgrade

The ENTRYPASS EP.L3800.PSU Elevator Master Control Panel is designed for elevator access-control applications where authorised users are permitted to access selected floors according to their credentials and programmed access rights. It works as part of a larger ENTRYPASS architecture involving readers, elevator controllers, I/O or output boards, power supplies, management software and the building’s existing lift control system.

SGCCTV – Choicecycle CCTV provides ENTRYPASS elevator access-control troubleshooting, repair, replacement and upgrading in Singapore, including existing EP.L3800.PSU, EP.POB.PSU and networked multi-elevator controller installations.

Model clarification: current ENTRYPASS documentation identifies the networked multi-elevator controller as EP.NE4800.PSU. If an installed unit is labelled EP.N4800.PSU or EP.N5200.PSU, its physical label, PCB revision and existing system documentation should be checked before ordering a replacement.

ENTRYPASS EP.L3800.PSU Elevator Master Control Panel

The EP.L3800.PSU is an ENTRYPASS elevator control panel supplied with a power supply and enclosure.

Current documentation describes it as:

Elevator Master Control Panel with 8-Floor Control + PSU with Casing

The L3800 can form the central interface between the access-control system and the lift-floor control infrastructure.

A typical architecture is:

ACCESS CARD / READER

↓

EP.L3800.PSU

↓

HIO / OUTPUT CONTROL

↓

EXISTING LIFT CONTROL PANEL

↓

AUTHORISED FLOOR ENABLED

The access-control equipment does not replace the elevator’s primary safety controller. It provides security-related floor-access interfacing to the existing lift-control system.

EP.L3800.PSU Key Functions

ENTRYPASS documentation shows the L3800 architecture supporting up to eight HIO nodes, allowing larger floor-control configurations to be designed.

How Elevator Access Control Works

Without access restriction, a person entering a lift may be able to select any normally available floor.

With an elevator access-control system:

PRESENT CARD

↓

CONTROLLER CHECKS USER

↓

ACCESS RIGHTS CHECKED

↓

PERMITTED FLOOR RELAY ENABLED

↓

USER SELECTS AUTHORISED FLOOR

For example:

Employee A → Floors 2, 3, 4

Employee B → Floors 5, 6

Manager → Floors 2–10

Contractor → Floor 3 only

Visitor → Approved floor only

Actual behaviour depends on the lift interface and access-control programming.

EP.POB.PSU Passive Output Board

The ENTRYPASS EP.POB.PSU is a Passive Output Board used within ENTRYPASS elevator-control architectures.

It is particularly relevant to multi-elevator installations.

The documented architecture shows configurations involving:

EP.NE4800 + EP.POB.PSU

for controlling multiple elevator cabs.

The POB provides output interfacing required between the elevator access controller and the corresponding lift-control arrangement.

Multi-Elevator Configuration

For larger buildings with several lift cars, the access-control design becomes more complex.

A system may include:

Central Server

↓

ENTRYPASS Network

↓

NE4800 Elevator Controller

↓

POB Output Board

↓

Individual Elevator Controllers

↓

ELEVATOR CAB 1 / 2 / 3 / 4

ENTRYPASS documentation illustrates both a single POB arrangement serving four elevator controllers and configurations using individual POB boards for separate elevator controllers.

The actual design should follow the existing lift architecture and project requirements.

EP.NE4800.PSU Networked Multi-Elevator Controller

The EP.NE4800.PSU is identified in current ENTRYPASS documentation as a:

Networked Multi-Elevator Controller

This is intended for more advanced networked elevator-access applications.

Compared with a simple standalone floor-access arrangement, a networked controller can form part of a centralised access-management system.

This is useful for:

Commercial Buildings

Office Towers

Factories

Warehouses

Condominiums

Industrial Buildings

Restricted Facilities

Multi-Lift Installations

L3800 vs NE4800

The correct replacement should be determined from the existing system architecture rather than selecting a controller solely by model number.

ENTRYPASS Elevator Access Control Repair Singapore

Older elevator-access systems can develop faults after years of continuous operation.

Common symptoms include:

Card Reads but Floor Button Cannot Press

All Floors Remain Locked

All Floors Become Accessible

One Floor Cannot Be Selected

Several Floors Not Working

Reader Completely Dead

Controller Offline

Communication Failure

Relay Output Failure

Power Supply Failure

Controller Repeatedly Restarts

Software Cannot Communicate with Controller

Lift Access Works Intermittently

Output Board Failure

Battery Failure

RS-485 Communication Problem

Network Controller Offline

A systematic diagnosis is required before replacing the controller.

Card Reader Works but Floor Cannot Be Selected

If the access reader accepts the user’s card but the authorised floor remains disabled, the reader itself may not be faulty.

The troubleshooting path should continue through:

CARD → READER → ACCESS CONTROLLER → FLOOR OUTPUT → LIFT INTERFACE

Possible causes include:

User Has No Floor Permission

Access Level Incorrect

Time Zone Restriction

Controller Offline

Output Relay Failure

HIO / POB Problem

Wiring Failure

Lift Interface Problem

Power Supply Problem

Replacing the reader alone will not correct these faults.

One Floor Not Working

If almost every floor works except one, the main controller may still be operating correctly.

Check:

FLOOR CONFIGURATION → OUTPUT → RELAY → WIRING → LIFT INPUT

Possible causes include:

Incorrect Floor Mapping

Failed Relay Output

Loose Terminal

Damaged Cable

Programming Error

Lift Controller Input Problem

This type of fault can sometimes be repaired without replacing the complete access-control panel.

Multiple Floors Not Working

If a group of floors suddenly becomes unavailable, the technician should investigate whether those floors share the same:

HIO Module

POB

Power Supply

Communication Bus

Controller

or common wiring path.

The failure pattern can provide an important clue to the actual defective component.

EP.L3800.PSU Power Supply Troubleshooting

The PSU is an important part of the controller assembly.

Ageing power equipment can cause:

Controller Rebooting

Intermittent Communication

Reader Failure

Relay Instability

Controller Offline

Random Access Problems

System Failure During Power Interruption

Testing should include the incoming supply, DC output, controller load and backup arrangement where applicable.

A controller should not automatically be declared defective until its power supply has been verified.

RS-485 Communication Troubleshooting

Existing L3800 installations can use RS-485 communications between system components.

RS-485 problems may be caused by:

A/B Polarity Reversed

Loose Terminal

Cable Damage

Poor Termination

Electrical Noise

Communication Converter Failure

Incorrect Device Address

Controller Failure

Expansion Module Failure

When communication is unstable, changing the controller without first checking the RS-485 infrastructure may leave the original problem unresolved.

Repair or Replace ENTRYPASS Controller?

The objective is to identify the defective module rather than unnecessarily replacing the complete installation.

Replacing an Existing EP.L3800.PSU

Replacing an elevator access controller requires more planning than replacing an ordinary card reader.

Before replacement, record and verify:

Existing Controller Model

PCB / Hardware Revision

Floor Quantity

Floor Number Mapping

Reader Configuration

HIO Modules

Output Wiring

RS-485 Addresses

Software Configuration

Power Supply

Existing Lift Interface

Access Levels

User Database

Time Zones

Emergency / Fire Release Arrangement

This information is important because the new controller must reproduce the intended floor-access logic.

Do Not Modify Lift Safety Circuits

Elevator access control is a security interface, not the elevator’s primary safety-control system.

Work involving the lift’s proprietary controller, safety chain or other regulated elevator functions should be coordinated with the appropriate lift contractor and responsible parties.

SGCCTV access-control work should focus on the authorised access-control interface and agreed integration points.

This distinction is especially important during replacement of old elevator-access panels.

ENTRYPASS Platform Migration

An older ENTRYPASS installation does not necessarily require complete replacement.

A staged strategy may be more practical:

Phase 1 — Troubleshoot

Check controller, PSU, communication and outputs.

Phase 2 — Repair

Restore cabling, PSU, communication or individual modules.

Phase 3 — Replace

Replace failed L3800, HIO, POB or compatible controller hardware where appropriate.

Phase 4 — Upgrade

Move obsolete installations toward supported networked ENTRYPASS architecture.

Phase 5 — Integrate

Where required, integrate compatible:

DOOR ACCESS + ELEVATOR ACCESS + CCTV + SECURITY MANAGEMENT

Elevator Access + CCTV Security

Elevator access control determines which floors a credential is authorised to access.

CCTV provides visual evidence of who actually entered the lift lobby or elevator.

A comprehensive security system can therefore combine:

CARD ACCESS EVENT

ELEVATOR FLOOR ACCESS

CCTV VIDEO

This can assist investigation of:

Unauthorised Floor Access

Tailgating

Lost or Misused Cards

After-Hours Access

Security Incidents

Visitor Movement

Restricted-Floor Entry

Compatibility and integration capability depend on the selected access-control and video-management platforms.

Preventive Maintenance for Elevator Access Control

Because lift-access controllers can operate continuously, preventive maintenance should include:

Controller Status

Power Supply Voltage

Backup Battery

Reader Operation

RS-485 Communication

Network Communication

HIO Modules

POB Boards

Floor Relay Outputs

Terminal Connections

Access Database

Floor Permissions

Event Logs

Software Communication

A test should include actual credential-to-floor operation rather than checking only whether the controller’s power LED is on.

SGCCTV ENTRYPASS Access Control Repair Singapore

SGCCTV – Choicecycle CCTV Pte Ltd provides ENTRYPASS EP.L3800.PSU elevator master control panel troubleshooting, EP.POB.PSU output-board servicing, EP.NE4800.PSU networked multi-elevator controller troubleshooting, access-control repair, replacement, PSU and battery replacement, reader servicing and security-system upgrading in Singapore.

For existing systems, the diagnostic sequence can include:

CARD → READER → CONTROLLER → HIO / POB → FLOOR OUTPUT → LIFT INTERFACE

before determining whether the appropriate solution is:

REPAIR → REPLACE → UPGRADE

Website: www.sgcctv.com.sg
WhatsApp: +65 9853 4404
Email: enquiry@choicecycle.com.sg

10 Frequently Asked Questions

1. What is the ENTRYPASS EP.L3800.PSU?
It is an elevator access-control panel supplied with a PSU and enclosure. Current product documentation describes the configuration as an elevator master control panel with 8-floor control, with expansion supported through the system architecture.

2. Can the L3800 control more than eight floors?
The system architecture supports expansion using HIO modules. The exact number of floors and required modules should be designed according to the installed system.

3. What is EP.POB.PSU?
It is an ENTRYPASS Passive Output Board used within supported elevator-control architectures, including multi-elevator configurations.

4. What is EP.NE4800.PSU?
It is an ENTRYPASS Networked Multi-Elevator Controller intended for networked elevator access-control applications.

5. My model is labelled EP.N4800.PSU or EP.N5200.PSU. Can it be replaced directly?
Do not assume direct compatibility. The physical model label, PCB revision, software, wiring and controller architecture should first be checked against the proposed replacement.

6. Why does my access card work but the lift-floor button remain disabled?
Possible causes include incorrect floor permissions, time-zone settings, controller communication, HIO/POB failure, relay-output failure, wiring or the lift-interface input.

7. Can a faulty L3800 power supply be replaced without replacing the whole access system?
Potentially yes. If the controller and other components remain serviceable, PSU-level repair or replacement may be sufficient after proper diagnosis.

8. Can an old ENTRYPASS elevator access system be upgraded?
Yes. Depending on the existing architecture, a phased migration can retain serviceable readers, wiring or other infrastructure while replacing obsolete controllers and modules.

9. Can elevator access control be integrated with CCTV?
Yes, on compatible systems. Access events and CCTV can be used together to improve security monitoring and incident investigation.

10. Where can I get ENTRYPASS elevator access-control repair or replacement in Singapore?
SGCCTV – Choicecycle CCTV provides troubleshooting, repair, replacement and upgrading for existing access-control and security systems. Contact WhatsApp +65 9853 4404, email enquiry@choicecycle.com.sg, or visit www.sgcctv.com.sg.

SEO Keywords

ENTRYPASS EP.L3800.PSU Singapore, EP L3800 PSU Elevator Control Panel, ENTRYPASS Elevator Master Control Panel, EP.POB.PSU Singapore, ENTRYPASS Passive Output Board, EP.NE4800.PSU, EP.N4800.PSU repair, EP.N5200.PSU replacement, elevator access control Singapore, lift access control repair, elevator controller repair, ENTRYPASS repair Singapore, access control replacement Singapore, lift card access system, elevator security system, SGCCTV, Choicecycle CCTV

15 Facebook Hashtags

#ENTRYPASS #EPL3800 #EPL3800PSU #EPPOBPSU #EPNE4800 #ElevatorAccessControl #LiftAccessControl #ElevatorController #AccessControl #AccessControlRepair #AccessControlReplacement #SecuritySystem #SingaporeSecurity #SGCCTV #Choicecycle

ENTRYPASS EP.L3800.PSU Elevator Master Control Panel EP.POB.PSU EP.N4800.PSU EP.N5200.PSU ACCESS CONTROL REPAIR REPLACE

Professional Access Control Power Supply for Facial Recognition, Door Access & Time Attendance Systems

A reliable power supply is one of the most important components of any facial recognition, access control and time attendance system. Even the most advanced biometric terminal cannot operate correctly if the power source is unstable or incorrectly designed.

The ENTRYPASS EP.POB.PSU, EP.N4800.PSU and EP.N5200.PSU power supply units are designed to provide stable DC power for EntryPass facial recognition terminals, door access controllers, RFID card readers, magnetic locks, electric strikes, exit buttons and related security devices.

Whether you are installing a new access control system or replacing an ageing power supply, choosing the correct ENTRYPASS PSU helps improve system reliability, minimise downtime and protect connected equipment.

Why Choose ENTRYPASS Power Supply?

Power supplies are responsible for delivering stable power to critical security equipment.

A quality ENTRYPASS power supply helps:

• Maintain stable system operation
• Reduce voltage fluctuations
• Support continuous access control operation
• Improve equipment reliability
• Protect connected access devices
• Support professional commercial installations

A correctly designed power distribution system is especially important when multiple devices such as facial terminals, controllers and magnetic locks are connected.

Compatible ENTRYPASS Systems

These power supply models are suitable for use with compatible ENTRYPASS solutions including:

• Facial Recognition Terminals
• Fingerprint Readers
• RFID Card Readers
• Door Access Controllers
• Time Attendance Terminals
• Magnetic Locks (EM Locks)
• Electric Strike Locks
• Door Exit Buttons
• Emergency Break Glass Units
• Door Sensors
• Access Control Expansion Modules

Always confirm the voltage, current and compatibility requirements before installation.

Professional Access Control Power Distribution

A typical ENTRYPASS door access system may include:

Facial Recognition Terminal → Access Controller → Power Supply → Magnetic Lock → Exit Button → Door Sensor → Management Software

The power supply provides stable operating power for the overall system and should be selected according to the total load of all connected devices.

Suitable Applications

The ENTRYPASS EP.POB.PSU, EP.N4800.PSU and EP.N5200.PSU are suitable for:

• Office Buildings
• Commercial Buildings
• Factories
• Warehouses
• Schools
• Universities
• Hospitals
• Hotels
• Condominiums
• MCST Properties
• Government Offices
• Data Centres
• Server Rooms
• Laboratories
• Industrial Facilities

Stable Power for Facial Recognition Systems

Modern facial recognition terminals require consistent power to maintain:

• Fast user authentication
• Reliable communication
• Door control operation
• Event logging
• Network connectivity
• Time attendance recording

An unstable or overloaded power supply may contribute to:

• Device rebooting
• Communication failures
• Door lock malfunction
• Unexpected shutdown
• Access interruption

Correct power planning helps improve overall system reliability.

Ideal for System Expansion

As businesses grow, additional equipment may be added to existing access control systems.

Examples include:

• Additional Door Controllers
• More Facial Recognition Terminals
• Extra Card Readers
• Additional EM Locks
• Exit Buttons
• Door Sensors

Selecting the appropriate power supply helps support future expansion while maintaining reliable operation.

Common Signs of a Faulty Access Control Power Supply

If your access control system experiences any of the following symptoms, the power supply should be inspected as part of the troubleshooting process:

• Facial Recognition Terminal Not Powering On
• Door Cannot Unlock
• EM Lock Not Releasing
• Controller Offline
• System Randomly Restarting
• Card Reader Not Responding
• Time Attendance Device Offline
• Intermittent Door Access Failure
• Power LED Not Illuminated
• Burning Smell or Overheating

A qualified technician should verify the power supply, wiring, battery backup (if installed), controller and locking devices before replacing equipment.

ENTRYPASS Power Supply Repair & Replacement Singapore

SGCCTV provides professional services including:

• Power Supply Replacement
• Door Access Troubleshooting
• Facial Recognition Installation
• Time Attendance Setup
• Controller Configuration
• EM Lock Replacement
• Access Control Upgrading
• Preventive Maintenance
• Technical Support
• On-site Diagnosis

Our engineers can identify whether the issue originates from:

• Power Supply
• Controller
• Facial Recognition Terminal
• Door Lock
• Exit Button
• Network Connection
• Cabling
• Battery Backup
• Configuration

This systematic approach helps reduce unnecessary replacement costs.

Why Buy from SGCCTV Singapore?

• Genuine Security Products
• Professional Installation
• Experienced Technical Engineers
• Door Access Repair & Replacement
• Facial Recognition Specialists
• Commercial & Industrial Project Experience
• Preventive Maintenance Contracts
• Technical Consultation
• After-Sales Support

SGCCTV – ENTRYPASS Security System Supplier Singapore

SGCCTV supplies complete ENTRYPASS security solutions including:

• Facial Recognition Systems
• Access Control Systems
• Time Attendance Systems
• RFID Card Readers
• Door Controllers
• Magnetic Locks
• Electric Strike Locks
• Exit Buttons
• Emergency Break Glass
• Power Supply Units
• Installation
• Repair
• Replacement
• Preventive Maintenance
• Technical Support

Contact SGCCTV Singapore

Website: www.sgcctv.com.sg

Email: enquiry@choicecycle.com.sg

WhatsApp: +65 98534404

10 Frequently Asked Questions (FAQ)

1. What are the ENTRYPASS EP.POB.PSU, EP.N4800.PSU and EP.N5200.PSU?

These are ENTRYPASS access control power supply units designed to provide stable power for compatible facial recognition terminals, controllers, locks and related access control equipment.

2. Why is a dedicated access control power supply important?

A dedicated power supply helps provide stable voltage for connected security devices, improving reliability and reducing the likelihood of interruptions caused by insufficient or unstable power.

3. Can these power supplies be used for facial recognition systems?

Yes. They are intended for use with compatible ENTRYPASS facial recognition and access control systems, subject to the required voltage and current specifications.

4. Can one power supply support multiple devices?

It depends on the total current consumption of all connected equipment. The power supply should always be selected according to the manufacturer’s electrical specifications and system design.

5. What devices can be connected?

Compatible installations may include facial recognition terminals, access controllers, RFID card readers, magnetic locks, electric strikes, exit buttons and other supported ENTRYPASS security devices.

6. What are common symptoms of a faulty power supply?

Possible symptoms include terminals failing to power on, controllers going offline, doors not unlocking, intermittent resets or unstable system operation. These symptoms can also have other causes, so proper troubleshooting is recommended.

7. Can I replace only the power supply instead of the whole access control system?

In many cases, yes. If troubleshooting confirms that the power supply is the cause of the fault and the remaining equipment is functioning correctly, replacing the power supply may restore normal operation.

8. Do these power supplies support time attendance systems?

Yes. They can be used with compatible ENTRYPASS time attendance terminals that meet the electrical requirements of the selected power supply.

9. Can SGCCTV troubleshoot my ENTRYPASS door access system?

Yes. SGCCTV provides onsite troubleshooting, repair, replacement, preventive maintenance and upgrading for ENTRYPASS access control, facial recognition and attendance systems throughout Singapore.

10. Where can I buy ENTRYPASS Power Supply EP.POB.PSU, EP.N4800.PSU and EP.N5200.PSU in Singapore?

Contact SGCCTV Singapore for genuine ENTRYPASS power supplies, facial recognition systems, access control equipment, installation and technical support.

WhatsApp: +65 98534404

Email: enquiry@choicecycle.com.sg

Website: www.sgcctv.com.sg

Top SEO Keywords

ENTRYPASS Power Supply Singapore, EP.POB.PSU Singapore, EP.N4800.PSU Singapore, EP.N5200.PSU Singapore, ENTRYPASS Access Control Power Supply, Facial Recognition Power Supply Singapore, Door Access Power Supply, Time Attendance Power Supply, ENTRYPASS Door Controller Power Supply, Magnetic Lock Power Supply, EM Lock Power Supply Singapore, Access Control Repair Singapore, Facial Recognition Repair Singapore, Door Access Replacement Singapore, ENTRYPASS Supplier Singapore, Security System Supplier Singapore, Time Attendance System Singapore, Access Control Installation Singapore, SGCCTV Singapore, Door Access Technical Support Singapore

ENTRYPASS EP.L3800.PSU Elevator Master Control Panel EP.POB.PSU EP.N4800.PSU EP.N5200.PSU ACCESS CONTROL REPAIR REPLACE

Professional AI Facial Recognition Security System for Commercial & Industrial Applications

The ENTRYPASS EP-SFR2100M / FR2100M Facial Recognition Terminal is a high-capacity biometric access control solution designed for organisations requiring fast facial authentication, door access control, RFID card authentication and personnel attendance management.

Powered by AI and deep-learning facial recognition technology, the FR2100M offers a stated recognition speed below 0.2 seconds per user and accuracy above 99%. It also provides face anti-spoofing and data-encryption features for stronger identity authentication. (EntryPass)

With capacity for up to 100,000 faces, 500,000 cards and 150,000 events, the FR2100M is particularly suitable for large offices, factories, warehouses, commercial buildings and enterprise security projects. (EntryPass)

Key Features of ENTRYPASS EP-SFR2100M

The FR2100M provides a strong combination of biometric and card-based authentication:

• 7-inch LCD touchscreen
• 2MP wide-angle camera
• 100,000 face capacity
• 500,000 card capacity
• 150,000 event capacity
• Facial recognition under 0.2 seconds/user
• Stated facial recognition accuracy above 99%
• 0.3 to 3 metre facial recognition distance
• Built-in MIFARE & DesFire card reader
• Face anti-spoofing
• Face mask detection
• Single-person and multi-person recognition up to 5 people
• ISAPI, ISUP 5.0 and TCP/IP IPv4/IPv6 support (EntryPass)

100,000 Face Capacity – Built for Large Organisations

One major advantage of the ENTRYPASS FR2100M is its high user capacity.

With storage for up to 100,000 faces, it can support much larger deployments than conventional small-office biometric terminals. Its 500,000-card capacity also makes it suitable for environments where facial recognition and physical credentials operate together. (EntryPass)

This makes the FR2100M particularly attractive for factories, industrial facilities, corporate campuses, warehouses and multi-department organisations.

Fast Face Recognition – Less Than 0.2 Seconds

Security should not create unnecessary congestion at staff entrances.

EntryPass specifies facial recognition at less than 0.2 seconds per user, with an accuracy rate above 99%. (EntryPass)

Fast authentication is especially valuable at locations where hundreds of employees may arrive or leave within a short period.

Facial Recognition + MIFARE + DesFire

The FR2100M is more than a face reader.

It incorporates a 13.56 MHz MIFARE and DesFire compatible card reader, allowing businesses to deploy facial and card-based authentication according to their security policy. (EntryPass)

For example, different areas can be designed around different authentication requirements depending on the overall access-control configuration.

Face Recognition → Convenient contactless access

RFID Card → Traditional credential access

Face + Card → Higher-security authentication workflow

Face Anti-Spoofing Security

Professional facial recognition requires protection against attempts to fool the authentication system.

EntryPass specifies face anti-spoofing together with data encryption for privacy protection on the FR2100M platform. (EntryPass)

This makes facial recognition more appropriate for controlled-access environments where authentication reliability is important.

0.3 to 3 Metres Recognition Distance

The FR2100M supports facial recognition from approximately 0.3 to 3 metres, giving installers flexibility when positioning the terminal at entrances and access points. (EntryPass)

The combination of a 7-inch touchscreen and 2MP wide-angle camera also provides a user-friendly interface for enrolment and authentication.

Facial Recognition Time Attendance System

When deployed with the appropriate EntryPass access-control platform and attendance configuration, personnel transactions can support time-attendance reporting and workforce management. EntryPass lists Time Attendance Report functionality within its broader access-control platform capabilities. (EntryPass)

This allows organisations to build an integrated environment around:

Employee Identification → Door Access → Transaction Records → Attendance Reporting

The exact attendance workflow should be configured according to the organisation’s HR and access-control requirements.

Contactless Access Control

Face recognition eliminates the need to physically touch a fingerprint reader or always present an access card.

The authorised user’s face becomes an authentication credential, creating a faster and more convenient access-control experience. EntryPass specifically positions its facial recognition platform as a contactless identification solution. (EntryPass)

Ideal Applications in Singapore

The ENTRYPASS EP-SFR2100M is suitable for factories, warehouses, corporate offices, commercial buildings, industrial facilities, schools, laboratories, server rooms, staff entrances, restricted departments and large organisations requiring centralised personnel access management.

EntryPass also positions its wider platform for centralised security and complex project environments, including manufacturing and other enterprise applications. (EntryPass)

ENTRYPASS Security System Supplier Singapore – SGCCTV

SGCCTV provides professional security solutions covering ENTRYPASS Facial Recognition, Door Access Control, Time Attendance, RFID Card Access, Magnetic Locks, Door Controllers, Exit Buttons, Emergency Break Glass, Power Supplies, Installation, Maintenance, Troubleshooting and System Upgrading.

A complete facial recognition access-control system can be designed around:

FR2100M Facial Terminal → Access Controller → Door Lock → Exit Device → Management Software → Attendance / Security Reporting

SGCCTV Singapore

WhatsApp: +65 98534404
Email: enquiry@choicecycle.com.sg
SGCCTV Singapore

10 FAQ – ENTRYPASS EP-SFR2100M

1. What is the ENTRYPASS EP-SFR2100M?

The FR2100M is a professional EntryPass Facial Recognition Terminal designed for high-capacity biometric access-control applications. It combines facial authentication, RFID card reading, networking and access-control functions. (EntryPass)

2. How many faces can the FR2100M store?

The FR2100M supports up to 100,000 faces, making it suitable for large organisations and enterprise deployments. (EntryPass)

3. How many access cards can it support?

EntryPass specifies a capacity of up to 500,000 cards, together with storage for 150,000 events. (EntryPass)

4. How fast is ENTRYPASS FR2100M face recognition?

The manufacturer specifies facial recognition in less than 0.2 seconds per user, with a stated accuracy rate above 99%. (EntryPass)

5. What is the facial recognition distance?

The FR2100M has a specified recognition distance of approximately 0.3 to 3 metres. (EntryPass)

6. Does FR2100M support access cards?

Yes. It includes a built-in MIFARE and DesFire card-reading module, providing an alternative or complementary authentication method to facial recognition. (EntryPass)

7. Does it have anti-spoofing protection?

Yes. EntryPass specifies face anti-spoofing and data-encryption capabilities designed to strengthen authentication security and privacy protection. (EntryPass)

8. Can FR2100M be used for time attendance?

Yes, when deployed with the appropriate EntryPass management and attendance configuration. EntryPass’s broader access-control platform supports Time Attendance Report functionality. (EntryPass)

9. Is the FR2100M suitable for factories and large companies?

Yes. Its 100,000-face and 500,000-card capacity, fast recognition and network integration make it particularly suitable for factories, warehouses, corporate offices, commercial properties and other large personnel-access applications. (EntryPass)

10. Where can I buy ENTRYPASS EP-SFR2100M in Singapore?

Contact SGCCTV Singapore for ENTRYPASS facial recognition, door access, time attendance, controllers, locking hardware, installation and technical support.

WhatsApp: +65 98534404
Email: enquiry@choicecycle.com.sg
SGCCTV Singapore – Access Control & Security Systems

10 FAQ – ENTRYPASS EP-FR2010M

1. What is the ENTRYPASS FR2010M?

The FR2010M is an EntryPass Facial Recognition Terminal designed for professional access-control applications. It combines AI facial recognition with an integrated RFID credential reader and network connectivity. (EntryPass)

2. How fast is the FR2010M face recognition?

EntryPass specifies a facial recognition duration of less than 0.2 seconds per user, with a stated recognition accuracy above 99%. (EntryPass)

3. How many faces can the FR2010M store?

The FR2010M supports up to 10,000 faces, along with 50,000 cards and 150,000 events. (EntryPass)

4. Can it be used for employee time attendance?

Yes. Facial authentication events can support employee attendance and personnel-management workflows, depending on the access-control software and system configuration deployed.

5. Does the FR2010M support access cards?

Yes. It incorporates a MIFARE and DesFire card-reading module, allowing RFID card authentication in addition to facial recognition. (EntryPass)

6. Can face and card authentication be combined?

Yes. EntryPass describes the terminal as supporting dual authentication modes, providing greater flexibility when configuring security requirements. (EntryPass)

7. What is the facial recognition distance?

The specified recognition distance is approximately 0.3 metres to 3 metres. This gives installers flexibility when positioning the terminal according to the entrance layout. (EntryPass)

8. Does the FR2010M have anti-spoofing protection?

Yes. EntryPass specifies face anti-spoofing as a security feature and also references data encryption for privacy protection. (EntryPass)

9. Is ENTRYPASS FR2010M suitable for offices and factories?

Yes. Its facial authentication, RFID capability, large credential capacity and network integration make it suitable for offices, factories, warehouses, commercial premises and controlled-access areas.

10. Where can I buy ENTRYPASS FR2010M in Singapore?

Contact SGCCTV Singapore for ENTRYPASS facial recognition terminals, access-control systems, door hardware, installation, maintenance and technical support.

WhatsApp: +65 98534404
Email: enquiry@choicecycle.com.sg
SGCCTV ENTRYPASS FR2010M product page