TP-LINK VIGI NVR2016H-16P 16-Channel POE NVR TAPO CAMERA Remote Management VIGI Surveillance Self-Adaptive Ethernet Interface

TP-LINK VIGI NVR2016H-16P 16-Channel PoE+ NVR | Remote Management | 4K CCTV Recorder | Tapo Camera Integration | Singapore

The TP-Link VIGI NVR2016H-16P is a professional 16-channel PoE+ Network Video Recorder designed for business, office, retail, warehouse, factory, condominium and commercial CCTV systems.

The latest V2 hardware version provides 16 PoE+ camera ports, 160Mbps incoming/outgoing bandwidth, up to 8MP recording, 4K HDMI output, H.265+ compression, dual SATA HDD bays, remote monitoring and a Gigabit self-adaptive Ethernet interface. (VIGI)

A key advantage is its integrated PoE architecture:

CAMERA + CAT6 + NVR = POWER + DATA + RECORDING

This makes the NVR particularly suitable for straightforward 8- to 16-camera CCTV installations.

TP-LINK VIGI NVR2016H-16P Key Specifications

These specifications are for the current Singapore-listed V2 model; V1 has lower bandwidth/decoding specifications, so hardware version should be checked when quoting or replacing an existing unit. (VIGI)

16-Channel CCTV NVR

The NVR supports up to:

16 × IP CCTV Cameras

A typical installation is:

16 × VIGI IP Cameras

↓

CAT6 Network Cables

↓

16 × NVR PoE Ports

↓

VIGI NVR2016H-16P

↓

HDD Recording + Monitor + Remote Management

This creates a relatively simple centralised CCTV architecture without requiring a separate PoE switch for standard installations.

16 Built-In PoE+ Ports

The NVR provides:

16 × IEEE 802.3af/at PoE+ Ports

with a total available PoE budget of 90W and up to 30W on an individual port. (VIGI)

Each connection can provide:

POWER + NETWORK DATA

through a single CAT6 cable.

This reduces installation complexity because conventional IP cameras do not require separate local power adapters.

However, the 90W total PoE budget must still be checked when using multiple higher-power cameras.

8MP CCTV Recording

The NVR supports recording resolutions including:

8MP • 5MP • 4MP • 3MP • 1080P • 720P

allowing it to work with a range of VIGI cameras from entry-level Full HD models through higher-resolution CCTV cameras. (VIGI)

For the V2 model, TP-Link specifies decoding capability including:

2 channels @ 8MP/30fps

4 channels @ 5MP/30fps

5 channels @ 4MP/30fps

6 channels @ 3MP/30fps

10 channels @ 1080P/25fps. (VIGI)

Recording capability and simultaneous decoding/display capability should not be confused—they are different NVR specifications.

160Mbps Incoming & Outgoing Bandwidth

The V2 model provides:

160Mbps Incoming + 160Mbps Outgoing Bandwidth

which is a substantial improvement over the older V1 version’s 80Mbps incoming / 60Mbps outgoing bandwidth. (VIGI)

Bandwidth matters when operating multiple high-resolution cameras.

A professional NVR design should calculate:

NUMBER OF CAMERAS × CAMERA BITRATE = REQUIRED NVR BANDWIDTH

rather than selecting an NVR based solely on channel count.

Gigabit Self-Adaptive Ethernet Interface

The VIGI NVR2016H-16P V2 provides:

1 × RJ45 10/100/1000Mbps Self-Adaptive Ethernet Interface

for its main network connection. (VIGI)

“Self-adaptive” means the Ethernet interface automatically negotiates the appropriate supported network speed with the connected switch or router.

The 16 dedicated PoE camera interfaces are 10/100Mbps self-adaptive ports.

This is normally sufficient for individual CCTV camera streams, while the Gigabit uplink handles aggregate NVR network traffic.

4K HDMI CCTV Display

The NVR provides HDMI output up to:

3840 × 2160 @ 30Hz

allowing connection to a compatible 4K monitor or television. (VIGI)

This is useful for:

Security Control Rooms

Guardhouses

Management Offices

Retail Surveillance

Warehouse Monitoring

CCTV Playback & Investigation

HDMI and VGA outputs are also supported for flexible monitor configurations.

H.265+ Video Compression

The VIGI NVR2016H-16P supports:

H.265+ / H.265 / H.264+ / H.264

video compression. (VIGI)

Efficient compression helps reduce:

HDD Storage Consumption

Network Bandwidth

Recording Infrastructure Cost

while maintaining appropriate CCTV image quality.

Actual storage savings depend on the camera, scene, bitrate, frame rate and recording configuration.

Dual SATA HDD — Up to 32TB

The current V2 specification provides:

2 × SATA HDD Interfaces

with support for:

Up to 16TB per HDD

providing up to 32TB of installed internal HDD capacity when two compatible 16TB drives are used. (VIGI)

This makes the NVR suitable for applications requiring longer recording retention.

Actual recording days depend on:

Camera Quantity + Resolution + FPS + Bitrate + Codec + Recording Schedule + Scene Activity

HDDs are not included as standard. (VIGI)

16-Channel Synchronous Playback

The NVR supports synchronous playback of up to:

16 Channels

subject to the total playback resolution/decoding limitation. TP-Link notes that the actual number may be fewer if total resolution exceeds the supported playback capacity. (VIGI)

This is useful during incident investigations where several cameras need to be reviewed at the same time.

For example:

Entrance Camera

Lobby Camera

Corridor Camera

Car Park Camera

can be reviewed together to reconstruct the movement of a person or vehicle.

Remote Management

TP-Link provides remote monitoring through its VIGI ecosystem. The NVR supports mobile access on Android and iOS, as well as browser-based access. (VIGI)

The VIGI platform can be used for remote CCTV operations such as:

Live View

Playback

Camera Monitoring

Event Review

Multi-Site Surveillance

TP-Link also provides VIGI VMS for centralised management of surveillance devices and users across multiple sites. (VIGI)

This makes VIGI particularly attractive for businesses operating several branches.

Multi-Site Architecture

SHOP A – VIGI NVR

SHOP B – VIGI NVR

WAREHOUSE – VIGI NVR

OFFICE – VIGI NVR

↓

VIGI REMOTE MANAGEMENT / VMS

↓

CENTRAL SECURITY MANAGEMENT

Can TP-Link Tapo Cameras Connect to VIGI NVR?

This needs to be stated carefully.

The NVR officially supports ONVIF Profile S, allowing compatible third-party IP cameras to be added. (VIGI)

Therefore, a Tapo camera that supports the necessary ONVIF/RTSP functionality may potentially be integrated as a third-party IP camera, depending on the exact Tapo model and firmware.

However:

TAPO CAMERA ≠ VIGI CAMERA

Tapo is TP-Link’s consumer/smart-home camera ecosystem, while VIGI is its professional surveillance ecosystem.

For a commercial CCTV project requiring the best NVR integration, analytics, alarm handling and management consistency, the preferred combination remains:

VIGI CAMERA + VIGI NVR

TP-Link itself warns that some functions can operate sub-optimally with third-party cameras and recommends VIGI cameras with VIGI NVRs for best performance. (TP-Link)

Therefore, I would market this as:

“Compatible with supported ONVIF cameras; selected Tapo models may be integrated subject to model/firmware compatibility.”

rather than claiming universal Tapo compatibility.

ONVIF Third-Party Camera Compatibility

The current NVR supports:

ONVIF Profile S + CGI

which can allow compatible cameras from other manufacturers to be connected. (VIGI)

This can be useful when replacing an old NVR while retaining serviceable existing IP cameras.

For example:

Existing ONVIF Cameras

↓

Replace Old NVR

↓

Install VIGI NVR2016H-16P

↓

Test Video / Recording / Playback

Advanced functions such as analytics, two-way audio and event triggering should always be tested individually because ONVIF compatibility does not guarantee every proprietary feature will operate.

Smart CCTV Alarm Functions

The V2 specification lists support for camera-dependent events including motion detection, video tampering, scene change, line crossing, intrusion detection, region entering/exiting, loitering, object abandoned/removal, vehicle detection, human detection and abnormal sound detection. (VIGI)

These functions depend on the capabilities of the connected camera.

This means the NVR should be viewed as part of an intelligent CCTV system:

SMART CAMERA + VIGI NVR + VIGI MANAGEMENT = COMPLETE SURVEILLANCE SOLUTION

One-Click System Initialization

TP-Link highlights One-Click System Initialize for simplifying camera addition, HDD initialisation and recording schedules. (VIGI)

This can reduce commissioning time compared with manually configuring each element of a new surveillance system.

For installers managing multiple similar sites, faster standardised configuration can reduce both labour time and configuration errors.

CCTV NVR Repair & Replacement

The VIGI NVR2016H-16P can also be considered when upgrading or replacing an older 16-channel IP CCTV recorder.

Common NVR problems include:

NVR Cannot Power On

Hard Disk Failure

No Recording

Camera Offline

PoE Port Failure

No Network Connection

Remote Viewing Offline

No HDMI Display

Playback Failure

HDD Full / HDD Error

Before replacing the NVR, diagnose:

NVR → HDD → PoE → CAT6 → CAMERA → NETWORK → ROUTER

A failed camera or damaged CAT6 cable should not be mistaken for an NVR failure.

Why Choose VIGI for Business CCTV?

The VIGI ecosystem is designed as a professional surveillance solution rather than simply a collection of standalone Wi-Fi cameras.

A complete system can combine:

VIGI IP Cameras

↓

VIGI PoE NVR

↓

Surveillance HDD

↓

VIGI App / Client / VMS

↓

Local + Remote CCTV Management

For SMEs, retail outlets, offices and warehouses, this provides a relatively straightforward path from a small CCTV installation to a multi-site surveillance environment.

SGCCTV TP-Link VIGI CCTV Singapore

SGCCTV – Choicecycle CCTV Pte Ltd provides TP-Link VIGI cameras, VIGI NVRs, PoE CCTV systems, CAT6 networking, surveillance HDDs, CCTV installation, NVR replacement, remote-viewing configuration and CCTV troubleshooting.

Website: www.sgcctv.com.sg
Email: enquiry@choicecycle.com.sg
WhatsApp: +65 9853 4404

10 Frequently Asked Questions

1. How many cameras can VIGI NVR2016H-16P support?
It supports up to 16 IP camera channels. (VIGI)

2. Does it have built-in PoE?
Yes. It provides 16 × IEEE 802.3af/at PoE+ interfaces, with a total 90W PoE budget and up to 30W per port. (VIGI)

3. Can it record 8MP CCTV cameras?
Yes. TP-Link lists recording resolutions up to 8MP. (VIGI)

4. Does the NVR have a Gigabit Ethernet port?
Yes. V2 has a 10/100/1000Mbps self-adaptive Gigabit RJ45 network interface. (VIGI)

5. How many hard disks can it support?
The current V2 model provides two SATA interfaces, with up to 16TB per HDD. (VIGI)

6. Does it support 4K monitor output?
Yes. HDMI output supports up to 3840 × 2160 at 30Hz. (VIGI)

7. Can I remotely manage the NVR?
Yes. TP-Link provides VIGI mobile/client and VMS options for remote surveillance and multi-site management. (VIGI)

8. Can Tapo cameras connect to this VIGI NVR?
Selected Tapo cameras may be usable where they provide compatible ONVIF/RTSP functionality, but compatibility should be checked by exact model and firmware. For maximum functionality, use VIGI cameras with the VIGI NVR.

9. Can other brands of IP cameras connect?
Potentially. The NVR supports ONVIF Profile S, but advanced functions may vary between camera brands. (VIGI)

10. Is V1 the same as V2?
No. The current V2 has significant specification improvements, including 160Mbps incoming/outgoing bandwidth, while V1 is listed at 80Mbps incoming and 60Mbps outgoing. Always check the hardware version when purchasing. (VIGI)

15 Facebook Hashtags

#TPLINK #VIGI #VIGICCTV #VIGINVR #NVR2016H16P #16ChannelNVR #PoENVR #PoECCTV #TapoCamera #NetworkVideoRecorder #RemoteCCTV #CCTVInstallation #CCTVSingapore #SGCCTV #Choicecycle

TP-Link VIGI NVR2016H-16P Official Singapore Product Page

TP-LINK VIGI NVR2016H-16P 16-Channel POE NVR TAPO CAMERA Remote Management VIGI Surveillance Self-Adaptive Ethernet Interface

The DAHUA DH-IPC-PTS2649C-3E3Z-4GB20 is a professional dual-lens 4G solar-powered PT network camera designed for remote locations, construction sites, temporary works, infrastructure projects and outdoor areas where fixed power and wired Internet are unavailable.

A specification correction is important for accurate SEO: this model is 3MP + 3MP dual lens, not 4MP, and Dahua officially rates it IP66, not IP67. It combines a fixed overview camera with a motorised PT camera, 6× hybrid zoom, AOV Always-On Video, WizColor, 4G connectivity, 65Wh battery, 8W solar panel, SMD 3.0, Auto Tracking Lite, two-way audio and up to 512GB microSD storage. (Dahua Technology)

Key Specifications

Dahua’s official specification confirms these capabilities. (Dahua Technology)

Dual Lens — One Camera, Two Views

One of the strongest features of the DH-IPC-PTS2649C-3E3Z-4GB20 is its dual-camera architecture.

Instead of relying on one lens, the unit combines:

3MP Fixed Lens → Overall Scene Monitoring

3MP PT Lens → Pan/Tilt Target Monitoring

The fixed camera maintains the broader overview while the PT camera can follow activity and provide a closer view. Dahua describes the coordinated fixed/PT monitoring design as providing a 360° view without blind spots. (Dahua Technology)

This architecture is particularly attractive for large outdoor areas.

6× Hybrid Zoom

The camera provides 6× hybrid zoom, allowing the system to obtain a closer view of distant activity without requiring a conventional large PTZ camera. (Dahua Technology)

For example:

Fixed Camera Detects Activity

↓

PT Camera Moves Toward Target

↓

Hybrid Zoom Provides Closer View

↓

Tracking Continues

This is useful for temporary construction sites, remote compounds, equipment yards and open areas.

Auto Tracking Lite

The DH-IPC-PTS2649C-3E3Z-4GB20 supports:

Auto Tracking Lite + Linkage Tracking

along with human and vehicle detection. (Dahua Technology)

This allows the PT lens to react to relevant activity detected within the surveillance scene.

Rather than requiring an operator to manually move the camera continuously, the intelligent functions can help automate target monitoring.

AOV — Always-On Video

Another major feature is Dahua AOV Mode – Always-On Video.

Dahua specifically states that AOV enables 24/7 recording with ultra-low power consumption. (Dahua Technology)

This is particularly significant for a battery-powered camera.

In AOV mode, Dahua specifies approximately 170mW consumption when recording one frame every two seconds to the SD card while maintaining the 4G connection. (Dahua Technology)

This provides a different operating concept from ordinary battery cameras that simply sleep until motion wakes them.

WizColor — Low-Light Colour Imaging

Both camera channels use F1.0 optics, with Dahua specifying minimum colour illumination down to 0.0005 lux under its stated test conditions. (Dahua Technology)

Dahua’s WizColor technology is intended to deliver useful colour imagery in extremely low-light conditions.

For construction sites and remote facilities, colour information can be particularly valuable when identifying:

Clothing • Vehicles • Machinery • Equipment • Objects

during nighttime incidents.

4G SIM Card Connectivity

The camera incorporates 4G cellular connectivity, removing the requirement for a fixed broadband connection at the installation location.

A typical architecture is:

DAHUA Solar Camera

↓

4G SIM Card / Mobile Network

↓

Internet

↓

DMSS Mobile App

This makes the camera particularly useful where there is:

No Fibre + No LAN + No Wi-Fi + No Fixed Internet

The EAU/EUR version supports multiple LTE-FDD and LTE-TDD bands, but the exact regional variant and local operator compatibility should be checked before deployment. (Dahua Technology)

Solar Panel + 65Wh Battery

The camera contains a:

65Wh Built-in Lithium Battery

and comes with an:

8W Solar Panel

It can additionally be charged through USB Type-C with QC2.0 support. (Dahua Technology)

The basic power architecture is:

SUNLIGHT

↓

8W SOLAR PANEL

↓

65Wh BATTERY

↓

DUAL-LENS 4G CAMERA

This eliminates the need to install conventional AC power at many temporary or remote locations.

Actual autonomy depends on sunlight, operating mode, 4G signal quality, tracking frequency, illumination usage, temperature and battery condition.

Up to 512GB Local Storage

The camera supports:

microSD Card up to 512GB

for local recording. (Dahua Technology)

This is especially valuable for 4G CCTV because continuously uploading every second of video through a cellular network can consume substantial mobile data.

A more efficient architecture can be:

Local SD Recording

4G Alarm Notification

Remote Live View When Required

This reduces unnecessary SIM-card data usage.

Active Deterrence

The camera provides both:

White-Light Warning

and

Audible Warning

Dahua specifies three available alarm sounds, with configurable volume and playback repetitions. (Dahua Technology)

This creates a useful security sequence:

DETECT → TRACK → RECORD → ALERT → DETER

For unmanned construction sites and remote facilities, active deterrence can be particularly valuable.

Two-Way Audio

The camera has a:

Built-in Microphone

Built-in Speaker

supporting two-way communication. (Dahua Technology)

An authorised remote operator can therefore potentially view activity and communicate with a person at the site.

This is useful for security warnings such as unauthorised entry into a restricted work area.

DMSS Mobile App

Dahua officially lists DMSS as the management software/mobile client for Android and iOS. (Dahua Technology)

This provides a convenient architecture for remote monitoring:

Construction Site

↓

Solar 4G Camera

↓

Mobile Network

↓

DMSS

↓

Security / Project Management

The actual remote functions available depend on the camera configuration, network connectivity and user permissions.

SmartPSS Compatibility — Check Before Specifying

For this particular model, Dahua’s current official specification lists DMSS as the management software. It does not list SmartPSS on the current product specification. (Dahua Technology)

Therefore, I would avoid advertising:

“SmartPSS Supported”

unless the exact firmware/version has been tested successfully.

For professional projects requiring centralised PC/VMS management, confirm software compatibility before tender submission.

Singapore MOM Construction-Site VSS Requirements

This camera is potentially interesting for Singapore construction-site monitoring, but “MOM compliant” should not be claimed based on the camera model alone.

Since 1 June 2024, Singapore MOM requires construction worksites with a contract value of S$5 million and above to install Video Surveillance Systems (VSS). (Ministry of Manpower)

MOM states that the VSS must be capable of:

Minimum HD 1080 resolution

At least 12 frames per second

Export to AVI, MP4 or another common multimedia format

Date stamp

Time stamp

Camera identification code

and recordings must generally be retained for at least 30 days, or 180 days after a reportable WSH incident. (Ministry of Manpower)

The Dahua camera itself provides 3MP at 15fps, exceeding MOM’s basic resolution and frame-rate thresholds. (Dahua Technology)

However, compliance applies to the complete VSS deployment, including placement, recording, retention and export—not merely the camera specification.

Better SEO wording:

“Suitable for MOM VSS Construction-Site Applications, subject to complete system design and compliance requirements.”

This is more accurate than claiming the camera itself is “MOM Certified.”

Singapore MOM – Video Surveillance System Requirements for Construction Sector

Where MOM Requires VSS Coverage

For applicable construction worksites, MOM specifies VSS coverage at areas involving activities such as work at height above 2m, scaffolding/formwork, excavation and shoring, lifting operations, industrial trucks, hazardous vehicular traffic, loading/unloading and certain confined-space work. (Ministry of Manpower)

A solar/4G camera can be particularly useful where these work zones move as construction progresses.

Instead of repeatedly installing:

AC Power + CAT6 + Network Switch + Fibre

the camera can potentially be relocated with the changing work area.

Workplace Privacy & CCTV

MOM also notes that workplace surveillance involving personal data must comply with applicable PDPA obligations. Organisations should establish clear rules, use surveillance at appropriate safety/security locations, inform workers of the purpose, and implement safeguards around storage and use of recordings. (Ministry of Manpower)

Therefore, construction-site CCTV should be deployed as part of a documented WSH, security and data-management policy.

Ideal Applications

The DH-IPC-PTS2649C-3E3Z-4GB20 is particularly suitable for:

Construction Sites • Temporary Worksites • Roadworks • Excavation Areas • Equipment Yards • Remote Compounds • Farms • Vacant Land • Car Parks • Infrastructure Projects • Outdoor Events • Temporary Security Deployments

Its strongest value proposition is:

NO AC POWER + NO LAN + NO WI-FI = SOLAR + BATTERY + 4G CCTV

SGCCTV DAHUA Solar 4G CCTV Singapore

SGCCTV – Choicecycle CCTV Pte Ltd provides DAHUA Solar CCTV, 4G SIM Card Cameras, Construction Site CCTV, Mobile CCTV, Battery Cameras, Temporary CCTV, MOM VSS solutions, CCTV rental, CCTV sales, installation and troubleshooting.

Website: www.sgcctv.com.sg
Email: enquiry@choicecycle.com.sg
WhatsApp: +65 9853 4404

10 Frequently Asked Questions

1. Is DH-IPC-PTS2649C-3E3Z-4GB20 a dual-lens camera?
Yes. It combines a 3MP fixed camera and a 3MP PT camera, allowing coordinated overview and movable target monitoring. (Dahua Technology)

2. Is this a 4MP camera?
No. The official specification is 3MP + 3MP, with each channel supporting up to 2304 × 1296 resolution. (Dahua Technology)

3. Does it support 4G SIM connectivity?
Yes. The camera has integrated 4G cellular connectivity. Select the appropriate regional version for the intended mobile network. (Dahua Technology)

4. Does it need AC power?
Not necessarily. It has a 65Wh built-in battery and comes with an 8W solar panel. USB Type-C charging is also supported. (Dahua Technology)

5. Does it support 24/7 recording?
It supports Dahua AOV Always-On Video, designed for 24/7 recording with ultra-low power consumption. (Dahua Technology)

6. Does it have auto tracking?
Yes. Dahua specifies Auto Tracking Lite and linkage tracking, together with human and vehicle detection. (Dahua Technology)

7. How much SD storage does it support?
The camera supports a microSD card up to 512GB. (Dahua Technology)

8. Is it IP67?
No. Dahua’s official specification lists IP66 protection, plus TVS 2000V lightning, surge and voltage-transient protection. (Dahua Technology)

9. Is this camera MOM compliant?
The camera’s 3MP/15fps capability exceeds MOM’s minimum 1080p/12fps VSS thresholds, but MOM compliance concerns the complete surveillance system—including coverage, timestamps, export capability and recording retention. It is therefore better described as potentially suitable for a compliant VSS design rather than as an independently “MOM-certified camera.” (Dahua Technology)

10. Can SGCCTV provide construction-site solar CCTV?
Yes. SGCCTV Choicecycle provides solar-powered, battery and 4G CCTV solutions for temporary and remote-site surveillance, including system design, installation and troubleshooting.

15 Facebook Hashtags

#Dahua #DahuaCCTV #SolarCCTV #4GCCTV #4GCamera #SolarCamera #BatteryCamera #DualLensCamera #WizColor #AOVCamera #ConstructionCCTV #MOMVSS #CCTVSingapore #SGCCTV #Choicecycle

DAHUA DH-IPC-PTS2649C-3E3Z-4GB20 Official Product Page

TP-LINK VIGI NVR2016H-16P 16-Channel POE NVR TAPO CAMERA Remote Management VIGI Surveillance Self-Adaptive Ethernet Interface

The DAHUA DH-IPC-HFW2441DG-4G-SP-B-MAX is a professional 4MP 4G LTE solar-powered battery network camera designed for locations where conventional power and fixed Internet cabling are difficult or expensive to install.

Unlike ordinary battery cameras that remain asleep until motion occurs, this model supports Dahua AOV – Always-On Video mode, designed to provide continuous surveillance while maintaining ultra-low power consumption. It combines 4MP video, integrated solar charging, 64Wh LiFePO₄ battery, 4G connectivity, PIR detection, Smart Dual Light, two-way audio, microSD storage and IP67 weather protection. (Dahua Technology)

Key Specifications

TP-LINK VIGI NVR2016H-16P 16-Channel POE NVR TAPO CAMERA Remote Management VIGI Surveillance Self-Adaptive Ethernet Interface

AOV – Always-On Video

One of the most important features is AOV mode.

Many conventional battery-powered cameras operate mainly as:

Camera Sleeping → PIR Trigger → Camera Wakes Up → Records Event → Returns to Sleep

This saves battery, but activity occurring immediately before the trigger may not be captured.

Dahua’s AOV architecture is designed differently. The camera maintains ultra-low-power surveillance and wakes to a higher recording frame rate when a person or vehicle appears. Dahua specifically promotes the model for 24/7 surveillance with ultra-low power consumption. (Dahua Technology)

This makes the camera especially useful where continuous situational awareness is more important than simple event-only recording.

4MP 2K Video

The camera uses a 1/3″ CMOS sensor and records at up to:

2560 × 1440 — 4MP @ 15fps

This provides substantially more image detail than conventional 1080P cameras while keeping bandwidth and power consumption manageable for a solar/4G application. (Dahua Technology)

The 3.6mm F1.6 fixed lens provides approximately 78.4° horizontal field of view, making it suitable for monitoring entrances, work sites, roads, compounds and open areas.

Solar Panel + LiFePO₄ Battery

The system incorporates a solar charging solution together with a:

64Wh / 6.4V Lithium Iron Phosphate Battery

Dahua specifies a battery cycle lifetime of more than 1,000 cycles. (Dahua Technology)

LiFePO₄ technology is particularly attractive for outdoor surveillance because of its cycle-life and thermal characteristics.

The architecture is straightforward:

SUNLIGHT

↓

SOLAR PANEL

↓

LiFePO₄ BATTERY

↓

DAHUA 4G CAMERA

↓

24/7 AOV / EVENT RECORDING

This greatly reduces dependence on fixed AC power infrastructure.

Official Battery Runtime Figures

Dahua publishes indicative battery-only operating durations under different operating modes:

TP-LINK VIGI NVR2016H-16P 16-Channel POE NVR TAPO CAMERA Remote Management VIGI Surveillance Self-Adaptive Ethernet Interface

HIKVISION ALARM SYSTEM

HIKVISION ALARM AX HYBRID PRO DS-PHA64-LP  || HIKVISION ALARM AX HYBRID PRO DS-PHA48-EP ||
HIKVISION ALARM LED Wired Keypad DS-PKG-H8L  || HIKVISION ALARM LED Wired Keypad DS-PKG-H4L  || HIKVISION ALARM Wired Keypad DS-PK-L  ||
HIKVISION Wired Dual-Tech AM Curtain Detector DS-PDC10DM-VG3 ||  HIKVISION ALARM Wired PIR AM Curtain Detector DS-PDC10AM-VG3 ||
HIKVISION ALARM Wired 4-way low current relay DS-PM1-O4L-H  ||  HIKVISION ALARM Wired 4-way power relay DS-PM1-O4H-H  ||
HIKVISION ALARM Wired Input Expander DS-PM1-I8O2-H  || HIKVISION ALARM RS485 Input Expander DS-PM-RSI8  ||
HIKVISION ALARM RS485 OUTPUT EXPANDER DS-PM-RSO4  || HIKVISION ALARM RS485 Output Expander DS-PM-RSO4-H  ||

HIKVISION SECURITY SCREENING SYSTEM

HIKVISION Security Screening X-Ray ISD-SC6550S-4CVL  ||  HIKVISION WALK-THROUGH METAL DETECTOR NP-SG101  || HIKVISION Handheld Metal Detector UD23074B  

TP-LINK VIGI NVR2016H-16P 16-Channel POE NVR TAPO CAMERA Remote Management VIGI Surveillance Self-Adaptive Ethernet Interface